Use cases
206 policies with a written use case, grouped by domain. Each entry links to the full policy page.
Windows Update (26)
- Allow signed updates from an intranet Microsoft update service location
Lets machines accept updates signed by a certificate in the local Trusted Publishers store, not just by Microsoft.
- Allow updates to be downloaded automatically over metered connections
Allows automatic update downloads on metered connections (cellular, mobile hotspot).
- Always automatically restart at the scheduled time
Forces a restart countdown (15 to 180 minutes) as soon as important updates are installed, which guarantees machines eventually restart in the planned window.
- Automatic Updates detection frequency
Sets how often clients poll WSUS (22 hours by default; the client waits 80 to 100% of the configured value to spread the load).
- Configure Automatic Updates
On a WSUS-managed fleet this is the setting that drives client behaviour: option 4 (auto download and schedule the install, 3:00 AM by default) suits workstations, option 5 lets the local admin choose, and option 7 (notify for install and…
- Configure maintenance windows for automatic updates
Defines recurring maintenance windows during which only the selected update actions are allowed; outside the window they are deferred to the next one.
- Delay Restart for scheduled installations
Sets how long (15 minutes by default) Windows waits before performing a scheduled restart after installation, giving the user time to save their work.
- Display options for update notifications
Controls Windows Update notifications: 0 (default) keeps standard notifications, 1 turns off most while keeping restart warnings, 2 turns off all including those warnings.
- Do not allow update deferral policies to cause scans against Windows Update
Prevents update deferral policies from triggering scans against Windows Update (so-called dual scan) when the device is also pointed at an internal service.
- Do not connect to any Windows Update Internet locations
Prevents machines from contacting public Windows Update endpoints and forces them to rely on WSUS only; needed in isolated or filtered networks.
- Do not include drivers with Windows Updates
Excludes drivers from Windows Update quality updates.
- Download Mode
Defines where update downloads come from: 0 HTTP only (no peer-to-peer), 1 LAN (default), 2 Group (the option Microsoft recommends for most organisations, including remote offices), 3 Internet, 99 Simple (turns off the Delivery…
- Enable client-side targeting
Client-side targeting lets each machine report to WSUS as a member of one or more groups (names separated by semicolons).
- Enabling Windows Update Power Management to automatically wake up the system to install scheduled updates
Lets Windows Update wake a hibernating computer to install scheduled updates.
- No auto-restart with logged on users for scheduled automatic updates installations
This setting prevents automatic restarts while a user is signed in (only active RDP sessions count) and only applies when Configure Automatic Updates is set to option 4.
- Remove access to "Pause updates" feature
Removes access to the Pause updates feature in the UI.
- Select the target Feature Update version
Keeps devices on a given Windows version (for example 23H2 or 24H2) until you decide to move, which is ideal when a line-of-business application is not yet validated on the next release.
- Select when Preview Builds and Feature Updates are received
Delays feature updates by up to 365 days.
- Select when Quality Updates are received
Delays the offer of quality updates by 0 to 30 days, which lets you build rings (for example 0, 5 and 10 days for pilot, fast and slow).
- Specify active hours range for auto-restarts
Caps how long a span users may declare as active hours, counted from the start time: 12 hours on Windows 10 1607 and Server 2016, 18 hours on later versions.
- Specify deadline before auto-restart for update installation
Sets between 2 and 14 days how long a pending post-install restart can wait before it is enforced (7 days by default, after which the user sees a restart-required notification).
- Specify deadline for automatic updates and restarts for feature update
The counterpart for feature updates: days before forced install and a grace period before the forced restart.
- Specify deadline for automatic updates and restarts for quality update
Sets, for quality updates, the deadline (days since the client discovered the update) and the grace period after the device enters restart-pending; once the effective deadline passes, the device restarts regardless of active hours.
- Specify Engaged restart transition and notification schedule for updates
Controls when Windows moves from automatic restarts outside active hours to "engaged restart", the period where users must schedule the restart themselves (7 days by default).
- Specify intranet Microsoft update service location
This setting points clients to your WSUS server instead of Windows Update.
- Turn off auto-restart for updates during active hours
Active hours stop Windows from restarting automatically during working hours (8 AM to 5 PM by default on PCs, user-adjustable).
BitLocker and TPM (15)
- Allow enhanced PINs for startup
Allows "enhanced" PINs with letters, symbols and spaces instead of digits only, which dramatically widens the search space.
- Allow network unlock at startup
Lets a domain-joined, TPM-equipped computer on the corporate wired LAN automatically unlock its BitLocker operating system drive at startup using a network key protector, avoiding the PIN prompt on unattended restarts (patching, remote…
- Choose drive encryption method and cipher strength (Windows 10 [Version 1511] and later)
Chooses the volume encryption algorithm for Windows 10 and later: XTS-AES 128-bit is the default, XTS-AES 256-bit adds security margin, and AES-CBC remains useful for compatibility with older versions.
- Choose how BitLocker-protected fixed drives can be recovered
The counterpart for fixed data drives (second internal disk, data partition): choice of recovery protectors and mandatory backup to AD DS.
- Choose how BitLocker-protected operating system drives can be recovered
Decides how the operating system drive can be recovered and, above all, forces the recovery key to be backed up to AD DS (with the option not to enable BitLocker until recovery information is stored).
- Configure minimum PIN length for startup
Sets the minimum length of the BitLocker startup PIN, from 4 to 20 digits (4 by default).
- Configure pre-boot recovery message and URL
Customises the message and URL displayed on the pre-boot BitLocker recovery screen.
- Configure the system to clear the TPM if it is not in a ready state.
Prompts administrators to clear the TPM when it is not in the Ready state, including "Ready, with reduced functionality".
- Control use of BitLocker on removable drives
Allows or prevents BitLocker use on removable drives, and can also stop users from suspending or decrypting the protection.
- Deny write access to fixed drives not protected by BitLocker
Denies write access to fixed data drives not protected by BitLocker: they mount read-only until encrypted.
- Deny write access to removable drives not protected by BitLocker
Prevents writing to USB drives and removable disks that are not encrypted with BitLocker To Go: users can read external media but can only copy data onto it after encryption.
- Disable new DMA devices when this computer is locked
Blocks new DMA devices on hot-pluggable Thunderbolt ports until a user signs in, and every time the session is locked.
- Require additional authentication at startup
This setting requires additional authentication at startup: TPM only, TPM + PIN, TPM + startup key, and so on.
- Standard User Individual Lockout Threshold
Limits how many TPM authorization failures a standard user can cause within the lockout window (4 by default); beyond that, their commands are blocked.
- Standard User Total Lockout Threshold
Caps the total TPM authorization failures across all standard users (9 by default) within the lockout window.
Microsoft Defender and system protection (15)
- Configure Attack Surface Reduction rules
Enables attack surface reduction (ASR) rules by GUID, each in block, audit or, for some, warn mode.
- Configure Controlled folder access
Controlled folder access protects documents from ransomware by preventing untrusted applications from modifying them.
- Configure detection for potentially unwanted applications
Turns on detection of potentially unwanted applications (adware, bundlers, evasion tools): in block mode they are quarantined; in audit mode they are only logged (event 1160).
- Configure the 'Block at First Sight' feature
Controls block at first sight: before allowing certain content to run or be accessed, the device checks in real time with the Microsoft cloud service (MAPS).
- Deploy App Control for Business
Deploys an App Control for Business (formerly WDAC) policy by GPO from a local path or a UNC share readable by computer accounts: only programs allowed by the policy run.
- Extension Exclusions
Excludes file types (for example obj or lib) from scheduled, custom and real-time scans.
- Join Microsoft MAPS
"Join Microsoft MAPS" turns on Defender Antivirus cloud-delivered protection.
- Path Exclusions
A list of paths excluded from scheduled and real-time scans.
- Prevent users and apps from accessing dangerous websites
Prevents users and applications from connecting to dangerous domains that host phishing, exploits or other malicious content, with three choices: Disabled (the default), Block (1) or Audit mode (2), where the event is only logged.
- Process Exclusions
Turns off real-time scanning of files opened by the listed processes, typically for a database server or line-of-business application whose disk access slows down under antivirus.
- Select cloud protection level
Sets how aggressively Microsoft Defender Antivirus blocks through the cloud: default, moderate, high, high+ or zero tolerance.
- Send file samples when further analysis is required
Defines whether Defender sends suspicious file samples to Microsoft: "send safe samples" (default) asks the user before sending files that may contain personal data, while "send all samples" is more comprehensive.
- Turn off Microsoft Defender Antivirus
Turns the Microsoft Defender antivirus off entirely when enabled.
- Turn off real-time protection
Turns off Microsoft Defender Antivirus real-time protection: always-on scanning of files and processes, behaviour monitoring and heuristics.
- Turn On Virtualization Based Security
Turns on virtualization-based security (VBS) and, through its options, Credential Guard, which isolates authentication secrets (NTLM hashes, Kerberos tickets) from the rest of the system.
LAPS (local administrator password) (10)
- Configure authorized password decryptors
Designates the user or group allowed to decrypt LAPS passwords stored in AD (Domain Admins by default).
- Configure automatic account management
Lets Windows LAPS create and manage a dedicated local administrator account itself (named WLapsAdmin by default, with an optional random name), without a provisioning script.
- Configure password backup directory
This is the setting that turns Windows LAPS on: 1 backs up the local administrator password to Microsoft Entra ID, 2 to Active Directory; the default is 0 (disabled) and while it stays there all other settings are ignored.
- Configure size of encrypted password history
Keeps from 0 to 12 previous encrypted passwords in AD (0 by default).
- Do not allow password expiration time longer than required by policy
Prevents setting a password expiration time further out than the policy requires (enabled by default in Windows LAPS).
- Enable password backup for DSRM accounts
Backs up and rotates the DSRM (Directory Services Restore Mode) password of domain controllers, avoiding the classic DSRM password never changed since promotion.
- Enable password encryption
Encrypts the password stored in Active Directory so that only authorised principals can read it, which is required to keep a history.
- Name of administrator account to manage
Specifies which local administrator account to manage.
- Password Settings
Sets the complexity, length (8 to 64, 14 by default) and age (1 to 365 days, 30 by default) of the managed password.
- Post-authentication actions
Defines what happens after the LAPS password is used: password reset, session sign-out, or even a reboot, after a delay of 0 to 24 hours (24 by default).
SMB and networking (21)
- Audit client does not support encryption
Logs SMB clients that do not support SMB encryption.
- Audit client does not support signing
Logs (events 3021/3022 in SMBServer/Audit) SMB clients that do not support signing.
- Audit server does not support encryption
Logs on the client side the SMB servers that do not support encryption.
- Audit server does not support signing
On the client side, logs (events 31998/31999 in SMBClient/Audit) SMB servers that do not support signing.
- Configure multicast DNS (mDNS) protocol
Indicates whether the DNS client resolves names over mDNS (multicast DNS).
- Configure NetBIOS settings
Determines whether the DNS client also resolves names over NetBIOS.
- Configure RPC packet level privacy setting for incoming connections
Enforces the "privacy" (encryption) authentication level on incoming RPC connections, used notably by the print spooler.
- Configure SMB v1 client driver
Disables the SMBv1 client driver (mrxsmb10) so the machine can no longer connect to a share over SMBv1, even if an old server remains on the network.
- Configure SMB v1 server
Disables the SMBv1 server (SMB1 value = 0), an obsolete and vulnerable protocol that Microsoft strongly advises against.
- Configure Windows NTP Client
Sets the Windows NTP client parameters: time server (NtpServer, in "name,flags" form; default time.windows.com,0x09), authentication type (NT5DS by default) and special poll interval (SpecialPollInterval: 3,600 s according to the…
- Enable authentication rate limiter
Enables the SMB server authentication rate limiter, which adds a 2-second delay after each failed NTLM or local KDC Kerberos attempt: an attack at 300 guesses per second for 5 minutes would take about 50 hours.
- Enable insecure guest logons
Determines whether the SMB client accepts insecure guest logons, meaning with no password, signing or encryption.
- Enable remote mailslots
Controls remote mailslots, a legacy mechanism used by SMB and domain controller location.
- Enable SMB over QUIC
Enables SMB over QUIC, available in all Windows Server 2025 editions: traffic is encrypted with TLS 1.3 and a certificate, letting remote or mobile users reach a file server without a VPN.
- Hardened UNC Paths
Imposes additional security requirements to access specific UNC paths: Windows reaches them only after those requirements are met.
- Mandate the minimum version of SMB
Enforces a minimum SMB 2/3 protocol version on the server, for example SMB 3.1.1 to refuse older dialects.
- NetBT NodeType configuration
Defines how NetBT registers and resolves names: the P-node type (point-to-point, WINS only) avoids NetBIOS resolution broadcasts that a local attacker can spoof.
- Turn off multicast name resolution
Disables LLMNR (multicast name resolution), a fallback protocol attackers exploit to poison responses and capture hashes.
- Windows Defender Firewall: Allow local program exceptions
Decides whether firewall rules created locally (by a local administrator or an application installer) are merged with those from the GPO.
- Windows Defender Firewall: Protect all network connections
Turns on Windows Defender Firewall in the domain profile and enforces the "on" state.
- Windows Defender Firewall: Protect all network connections
Turns on Windows Defender Firewall in the standard (private) profile, used outside the domain, for example at a teleworker's home or on a known local network.
Authentication (NTLM, Kerberos, LSA) (17)
- Allow Custom SSPs and APs to be loaded into LSASS
Controls loading of custom security (SSP) and authentication (AP) providers into LSASS.
- Allow the use of biometrics
Allows or blocks the Windows Biometric Service, a prerequisite for Windows Hello with fingerprint, face or iris (on by default; to sign in with biometrics, that sign-in mode must also be allowed).
- Block NTLM (LM, NTLM, NTLMv2)
Prevents the SMB client from using NTLM to authenticate to remote servers, which forces Kerberos and limits relay, brute-force and pass-the-hash attacks.
- Block NTLM Server Exception List
Lists servers to which the SMB client may still use NTLM while global blocking is on.
- Configures LSASS to run as a protected process
Runs LSASS as a protected process: non-protected processes can no longer read its memory or inject code into it, which makes in-memory credential theft harder.
- Encryption Oracle Remediation
Sets how tolerant CredSSP, used among others by Remote Desktop, is toward unpatched clients and servers affected by the CVE-2018-0886 encryption oracle flaw.
- Extended Protection for LDAP Authentication (Domain Controllers only) (DEPRECATED)
Requires channel binding for LDAP authentications on domain controllers to counter relay attacks over LDAP over TLS.
- Fail authentication requests when Kerberos armoring is not available
Makes the computer require Kerberos armoring (FAST) for its AS and TGS exchanges with domain controllers.
- Kerberos client support for claims, compound authentication and Kerberos armoring
Turns on, on the computer, the request for claims and compound authentication used by Dynamic Access Control, as well as Kerberos armoring (FAST) of messages, in domains that support them.
- LSA Protection
Runs LSASS as a protected process (PPL), which prevents an untrusted process from reading its memory to steal credentials.
- Lsass.exe audit mode
Turns on LSA protection audit mode (AuditLevel = 8 on LSASS.exe): Windows logs in the CodeIntegrity/Operational log the modules that would be blocked without blocking them (events 3065 and 3066).
- Remote host allows delegation of non-exportable credentials
Enable it on the remote host, the server or workstation you connect to over Remote Desktop, so that it accepts Restricted Admin and Remote Credential Guard modes.
- Restrict delegation of credentials to remote servers
Enforces, on the Remote Desktop client, one of the two modes that avoid exposing credentials to the remote host: “Require Restricted Admin” (1), “Require Remote Credential Guard” (2) or “Restrict credential delegation” (3), which prefers…
- Turn on security key sign-in
Allows Windows sign-in with a FIDO2 security key.
- Use a hardware security device
Requires Windows Hello for Business to be provisioned only on devices with a usable TPM 1.2 or 2.0: data protected by a TPM cannot be used on another device.
- Use Windows Hello for Business
Enables Windows Hello for Business for all users (enabled), no users (disabled), or lets users choose (not configured).
- WDigest Authentication (disabling may require KB2871997)
Controls WDigest's UseLogonCredential value: when it is 1, Windows keeps signed-in users' clear-text passwords in memory, which tools such as Mimikatz exploit.
Remote Desktop and WinRM (12)
- Allow Basic authentication
Controls whether the WinRM service accepts Basic authentication from a remote client.
- Allow Basic authentication
Controls whether the WinRM client uses Basic authentication.
- Allow unencrypted traffic
Allows the WinRM client to send and receive unencrypted messages.
- Always prompt for password upon connection
Forces the Remote Desktop server to always ask for the password, even if the user saved it in the Remote Desktop Connection client.
- Do not allow Clipboard redirection
Prevents Clipboard sharing between the remote computer and the client during a Remote Desktop session, in both directions.
- Do not allow drive redirection
Prevents mapping of the client’s drives in the Remote Desktop session.
- End session when time limits are reached
Makes sessions that reach a time limit be logged off and deleted instead of merely disconnected.
- Require use of specific security layer for remote (RDP) connections
Forces the security layer of RDP connections between clients and the session host: Negotiate (the most secure the client supports, falling back to native RDP encryption if TLS is unavailable), RDP (native encryption) or SSL (TLS).
- Require user authentication for remote connections by using Network Level Authentication
Requires Network Level Authentication (NLA) for Remote Desktop connections: the user is authenticated before the session starts, so before the sign-in screen is shown.
- Set client connection encryption level
Sets the minimum encryption level for connections between clients and the session host: Low, Client Compatible or High (128-bit in both directions).
- Set time limit for active but idle Remote Desktop Services sessions
Disconnects active but idle sessions (no input) after a delay you set, with a warning two minutes before.
- Set time limit for disconnected sessions
Deletes disconnected sessions after a set delay (unlimited by default).
PowerShell and auditing (6)
- Include command line in process creation events
Adds the full command line to event 4688 (process creation) in the Security log, showing how an executable was launched (for example wscript.exe with a specific VBS file).
- Specify the maximum log file size (KB)
Sets the maximum size of the Security log, from 20 MB to 2 TB (local default: 40 MB).
- Turn on Module Logging
Records pipeline execution events for the modules you list (for example "*" for all).
- Turn on PowerShell Script Block Logging
Logs the content of every PowerShell script block executed (interactive or automated) to the event log, including code decoded after obfuscation.
- Turn on PowerShell Transcription
Captures the input and output of all PowerShell sessions to text files, as if Start-Transcript ran in every session.
- Turn on Script Execution
Sets the PowerShell execution policy by GPO: "allow only signed scripts" (AllSigned), "allow local scripts and remote signed scripts" (RemoteSigned) or "allow all scripts".
Printing (5)
- Configure Redirection Guard
Turns on Redirection Guard for the print spooler: the process no longer follows file redirections (junctions, links) that an administrator did not create, which closes a family of privilege escalations where a user hijacks a write made by…
- Limits print driver installation to Administrators (DEPRECATED)
Limits printer driver installation to administrators (RestrictDriverInstallationToAdministrators = 1), which neutralises PrintNightmare-style privilege escalation.
- Only use Package Point and print
Limits Point and Print to package-aware (packaged, signed) drivers, which are safer than older non-packaged ones.
- Package Point and print - Approved servers
Restricts Point and Print connections to the print servers you list (fully qualified names separated by semicolons; IP addresses accepted since the September 2021 updates).
- Point and Print Restrictions
Restricts the print servers machines can connect to and requires a warning and elevation (UAC prompt) to install or update drivers.
Removable devices and AutoPlay (8)
- All Removable Storage classes: Deny all access
Denies all access (read, write, execute) to all removable storage classes; it overrides per-class settings.
- Prevent installation of devices that match any of these device IDs
Blocks specific devices by hardware ID, useful to forbid a given USB key model or a known adapter without touching others.
- Prevent installation of devices using drivers that match these device setup classes
Blocks device installation by setup class (GUID in braces), for example all USB storage devices.
- Prevent installation of removable devices
Prevents installation of removable devices (those whose driver reports them as removable).
- Removable Disks: Deny execute access
Denies execution of programs from removable disks.
- Removable Disks: Deny write access
Denies write access to removable disks (USB drives, external disks) while keeping read access: it prevents data exfiltration without blocking consumption of files coming from outside.
- Set the default behavior for AutoRun
Sets the default behaviour for AutoRun commands (autorun.inf files): do not run, prompt, or run automatically.
- Turn off Autoplay
"Turn off Autoplay" stops Windows from automatically launching a medium's content as soon as it is inserted.
Privacy and AI (11)
- Allow Cortana
Controls Cortana on Windows.
- Allow Diagnostic Data
Sets the level of diagnostic data Windows sends to Microsoft: Off (0, only on Enterprise, Education and Server), Required (1, the default since Windows 10 1903) or Optional (3).
- Allow Recall to be enabled
Controls the availability of Recall (screen snapshots for searching past activity) on Copilot+ PCs.
- Disable Click to Do
Disables Click to Do, the feature that takes a screenshot and offers actions on its content (text, image).
- Don't search the web or display web results in Search
Prevents Windows Search from querying the web and showing web results.
- Let Windows apps access the camera
Decides whether Windows apps can use the camera: “User is in control” (0, the default, through Settings > Privacy), “Force allow” (1) or “Force deny” (2).
- Let Windows apps access the microphone
Same mechanism as for the camera, applied to the microphone: a default for all apps (“User is in control”, “Force allow” or “Force deny”) and per-app exceptions by package family name.
- Limit Diagnostic Log Collection
Prevents collection of additional diagnostic logs, which Microsoft may request to troubleshoot an issue when the Optional level is set.
- Turn off Microsoft consumer experiences
Turns off Windows "consumer experiences": Start suggestions, membership notifications, automatic app installation after initial setup, redirect tiles.
- Turn off saving snapshots for use with Recall
Controls whether users can choose to save screen snapshots for Recall.
- Turn off Windows Copilot
Turns off the legacy "Copilot in Windows" experience (taskbar icon hidden, no access).
OneDrive (8)
- Allow syncing OneDrive accounts for only specific organizations
Allows syncing only for organisations whose tenant ID you list (for example yours and a partner's).
- Prevent users from redirecting their Windows known folders to their PC
Prevents users from redirecting their known folders back to the PC, and therefore from stopping OneDrive protection after Known Folder Move.
- Prevent users from syncing personal OneDrive accounts
Prevents syncing personal OneDrive accounts with the work client, which avoids business data ending up in personal storage.
- Prompt users to move Windows known folders to OneDrive
Shows users a dialog inviting them to protect their Desktop, Documents and Pictures folders in OneDrive; if dismissed, a reminder appears in the activity center until the move or an error occurs.
- Set the maximum size of a user's OneDrive that can download automatically
Sets the maximum size of a OneDrive that downloads automatically during silent sign-in (beyond it, the user is prompted to choose folders).
- Silently move Windows known folders to OneDrive
Silently moves Desktop, Documents and Pictures to OneDrive with no user interaction, with an optional notification afterwards.
- Silently sign in users to the OneDrive sync app with their Windows credentials
Automatically signs the OneDrive sync app in with the work account used to sign in to Windows, without the user entering credentials.
- Use OneDrive Files On-Demand
Manages OneDrive Files On-Demand, which shows cloud files in File Explorer without downloading them until you open them.
Microsoft Edge (14)
- Action to take on Microsoft Edge startup
Defines what Edge does at startup: open a new tab, restore the last session, open a list of URLs, or (since Edge 125) restore the last session and also open a list of URLs.
- Allow specific extensions to be installed
Allows installation of specific extensions; use it with a block list of * so only security-approved extensions get through (corporate password manager, signing tool, etc.).
- Configure extension management settings
Manages extensions in a granular way through a JSON string: blocking permissions (for example usb), blocking access to certain sites, blocking an entire extension store by its update URL.
- Configure InPrivate mode availability
Controls InPrivate browsing: available (0, the default), disabled (1) or forced (2), in which case pages always open in InPrivate.
- Configure Internet Explorer integration
Sets how Edge integrates with Internet Explorer, that is, Internet Explorer mode for legacy sites.
- Configure Microsoft Defender SmartScreen
Controls Microsoft Defender SmartScreen in Edge, which warns about phishing or malware-distribution sites and analyses downloaded files.
- Configure Microsoft Defender SmartScreen to block potentially unwanted apps
Turns on blocking of potentially unwanted applications in Edge through SmartScreen (associated downloads and URLs).
- Configure the home page URL
Sets Edge's home page URL (the page opened by the Home button), for example the company intranet.
- Control which extensions are installed silently
Silently installs extensions that users cannot uninstall or disable, for example an SSO extension, a filtering proxy extension or a corporate ad blocker.
- Control which extensions cannot be installed
Blocks installation of specific extensions by ID; the value * blocks all extensions.
- Enable saving passwords to the password manager
Determines whether Edge can save passwords in its manager and fill them in automatically on a later visit.
- Prevent bypassing Windows Defender SmartScreen prompts for sites
Prevents users from ignoring SmartScreen warnings about potentially malicious sites: they are blocked instead of being able to continue.
- Target Channel override
Chooses the channel Edge follows: Stable, Beta, Dev or Extended Stable (the latest extended stable version, which follows a longer release cadence than Stable).
- Update policy override default
Sets update behaviour for all Edge channels: 0 disabled, 1 always allowed (recommended), 2 manual only, 3 silent automatic only.
Microsoft Office (6)
- Block all internet macros (ignore trusted locations or publishers)
Removes the usual exceptions for Office files downloaded from the internet (marked with Mark of the Web): by default Office blocks their VBA macros, unless the file is in a trusted location or the macro is signed by a trusted publisher.
- Block macros from running in Office files from the internet
Blocks VBA macros in Office files that come from the Internet (marked with the Mark of the Web): users see a "Security Risk" banner with no button to enable content.
- Block macros from running in Office files from the internet
Blocks VBA macros in Office files that come from the Internet (marked with the Mark of the Web): users see a "Security Risk" banner with no button to enable content.
- Do not open files from the internet zone in Protected View
Mind the inverted wording: when enabled, this policy stops Word files from the Internet zone from opening in Protected View, that is, it turns that protection off.
- Macro Notification Settings
Defines VBA macro notification in Excel.
- VBA Macro Notification Settings
Defines VBA macro notification in Word.
Chrome and Firefox (10)
- Block about:config
Blocks access to about:config, Firefox's advanced settings page, through which a user could change preferences, including security-related ones.
- Configure extension installation blocklist
Prevents users from installing certain Chrome extensions, identified by their ID; the value * blocks all extensions by default.
- Configure the list of force-installed apps and extensions
Silently installs Chrome apps and extensions that the user cannot uninstall or turn off from the interface: SSO, filtering or enterprise security extensions.
- Disable Firefox Accounts
Disables Firefox Accounts integration, and therefore Firefox Sync, which synchronises bookmarks, passwords and history through Mozilla's servers.
- Disable Telemetry
Prevents Firefox from uploading telemetry data; since Firefox 83 and ESR 78.5, local storage of that data is also disabled.
- Disable Update
Turns off Firefox application updates, which is used when versions are deployed by a management tool (Intune, Configuration Manager, ESR deployment) and you do not want uncontrolled updates.
- Enable saving passwords to the password manager
Manages Chrome’s ability to remember website passwords and save them in its built-in manager.
- Extension management settings
Manages Chrome extensions centrally and in detail: per-extension install mode (allowed, blocked, force-installed, etc.), blocked API permissions, update URL.
- Incognito mode availability
Determines whether users can open pages in private browsing: available (0, the default), disabled (1) or forced (2).
- Safe Browsing Protection Level
Controls Chrome’s Safe Browsing feature and its mode: no protection (0), standard (1, the default) or enhanced (2).
Other (22)
- Agent Connector Access Policy
Defines the list of allowed connections between MCP hosts (the agents) and MCP servers on the device, as a JSON string that follows the schema given in the policy description.
- Allow widgets
Allows or blocks the Widgets feature on the device, including the content shown on the taskbar.
- Always install with elevated privileges
Do not enable it: this policy makes any .msi file launched by a user run as the System account, without telling an approved installer from a booby-trapped MSI: any user can craft a package that creates an administrator or opens a SYSTEM…
- Always wait for the network at computer startup and logon
Makes Group Policy processing synchronous: the computer waits for the network to be fully initialised at startup and at user logon.
- Apply UAC restrictions to local accounts on network logons
Applies UAC token filtering to local accounts logging on over the network (NET USE, C$ access): Administrators membership is disabled and powerful privileges are stripped from the resulting token.
- Configure App Install Control
Restricts where users can install applications from: Microsoft Store only, a warning before installing from outside the Store, simple Store app recommendations, or no restriction (“Turn off app recommendations”).
- Configure Group Policy slow link detection
Defines the throughput below which the link to the domain controller is considered slow (500 Kbps by default); 0 treats every connection as fast, and a checkbox lets you always treat mobile broadband as slow.
- Configure user Group Policy loopback processing mode
Turns on loopback processing: user settings come from the GPOs linked to the computer, whichever user logs on to it; it is used for kiosks, training rooms, Remote Desktop servers and public machines, where settings must depend on the…
- Configure Windows Defender SmartScreen
Turns on SmartScreen in the shell: a dialog warns the user before running a downloaded application that is unrecognised or known to be malicious.
- MSS: (AutoAdminLogon) Enable Automatic Logon
Turns on automatic logon (AutoAdminLogon set to 1), a setting whose own title says not to use it.
- MSS: (DisableIPSourceRouting) IP source routing protection level
Controls protection against IP packets that use source routing, where the sender dictates the packet’s path.
- MSS: (SafeDllSearchMode) Enable Safe DLL search mode
Enables safe DLL search mode: the application’s current folder is no longer searched right after its own folder, but later in the search order (step 11 instead of step 8, after the system and Windows folders).
- NTLM Enhanced Blocking
Replaces the all-or-nothing legacy Restrict NTLM policies with targeted criteria: blocking NTLM single sign-on for domain accounts, NTLM authentication on domain controllers, NTLM when machine binding fails, or all NTLM.
- Password protect the screen saver
Requires every screen saver to ask for a password on return, and greys out the “Password protected” checkbox so users cannot clear it.
- Prohibit access to Control Panel and PC settings
Prevents Control.exe and SystemSettings.exe from starting: users can no longer open Control Panel or the Settings app, or run any of their items.
- Remove Task Manager
Prevents users from starting Task Manager (taskmgr.exe), which lets them end programs, monitor performance, see running processes and services, find executable names and change a process’s priority.
- Require a password when a computer wakes (plugged in)
Requires a password when the computer wakes from sleep while plugged in: the system returns to the secure desktop instead of reopening the session.
- Screen saver timeout
Sets how long a user must be idle before the screen saver starts: from 1 to 86,400 seconds, with 0 meaning it never starts.
- Set Group Policy refresh interval for computers
Sets how often computer policy is refreshed in the background while the machine is in use.
- Settings Page Visibility
Hides, or conversely shows only, selected pages of the Settings app.
- Turn off the advertising ID
Turns off the advertising ID, which apps use to deliver personalised experiences across apps.
- Use a common set of exploit protection settings
Rolls out the same Exploit Protection configuration to every endpoint: system and per-application mitigations (DEP, ASLR, CFG and so on) gathered in an XML file whose location you specify, local, UNC or URL.
No use case matches.