Set up a maintenance schedule to limit the maximum network bandwidth used for BITS background transfers
Configurer une planification de maintenance pour limiter la bande passante réseau maximale utilisée pour les transferts BITS en arrière-plan
Explanation
This policy setting limits the network bandwidth that Background Intelligent Transfer Service (BITS) uses for background transfers during the maintenance days and hours. Maintenance schedules further limit the network bandwidth that is used for background transfers.
If you enable this policy setting, you can define a separate set of network bandwidth limits and set up a schedule for the maintenance period.
You can specify a limit to use for background jobs during a maintenance schedule. For example, if normal priority jobs are currently limited to 256 Kbps on a work schedule, you can further limit the network bandwidth of normal priority jobs to 0 Kbps from 8:00 A.M. to 10:00 A.M. on a maintenance schedule.
If you disable or do not configure this policy setting, the limits defined for work or nonwork schedules will be used.
Note: The bandwidth limits that are set for the maintenance period supersede any limits defined for work and other schedules.
Ce paramètre de stratégie limite la bande passante réseau utilisée par le service BITS durant les jours et les heures de maintenance. Les planifications de maintenance limitent encore davantage la bande passante réseau utilisée pour les transferts en arrière-plan.
Si vous activez ce paramètre de stratégie, vous pouvez définir un ensemble de limites de bande passante réseau distinct, puis configurer une planification pour la période de maintenance.
Vous pouvez spécifier la limite à utiliser pour les tâches en arrière-plan lors de la planification d’une maintenance. Par exemple, si les tâches de priorité normale sont actuellement limitées à 256 Kbits/s dans une planification de tâches, vous pouvez limiter la bande passante réseau des tâches de priorité normale à 0 Kbits/s de 8 h 00 à 10 h 00 dans une planification de maintenance.
Si vous désactivez ou ne configurez pas ce paramètre de stratégie, les limites définies pour la planification des tâches et pour les autres planifications sont utilisées.
Remarque : les limites de bande passante réseau définies pour la période de maintenance ont priorité sur les limites définies pour la planification des tâches et pour les autres planifications.
Registry
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\BITS\Throttling- Value name
EnableMaintenanceLimits
| State | Value written |
|---|---|
| Enabled | not defined in the ADMX (see the options below) |
| Disabled | not defined in the ADMX (see the options below) |
PowerShell
PowerShell commands that write to the registry what the policy would write. Values in angle brackets (<…>) must be replaced.
The ADMX does not specify the value written when enabled; the GPO editor usually writes REG_DWORD 1 (enabled) / 0 (disabled). The commands below use 1/0 as an assumption.
Writing directly to the registry bypasses Group Policy: if a GPO manages this value, it will be rewritten at the next gpupdate; otherwise the value stays in place (the "tattooing" effect). Prefer a GPO or, locally, LGPO.exe. Run PowerShell as administrator for HKLM. Some policies need a restart or gpupdate /force.
Enable
# Enable: Bits/BITS_MaxBandwidthV2_Maintenance
$k = 'HKLM:\Software\Policies\Microsoft\Windows\BITS\Throttling'
if (-not (Test-Path -Path $k)) { New-Item -Path $k -Force | Out-Null }
# The ADMX does not specify the value written; the GPO editor usually writes REG_DWORD 1 (enabled) / 0 (disabled)
Set-ItemProperty -Path $k -Name 'EnableMaintenanceLimits' -Value 1 -Type DWord # assumed value (not defined in the ADMX)
$k = 'HKLM:\Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule'
if (-not (Test-Path -Path $k)) { New-Item -Path $k -Force | Out-Null }
# From
# Possible options:
# Sunday = 0
# Monday = 1
# Tuesday = 2
# Wednesday = 3
# Thursday = 4
# Friday = 5
# Saturday = 6
Set-ItemProperty -Path $k -Name 'StartDay' -Value 1 -Type DWord
# To
# Possible options:
# Sunday = 0
# Monday = 1
# Tuesday = 2
# Wednesday = 3
# Thursday = 4
# Friday = 5
# Saturday = 6
Set-ItemProperty -Path $k -Name 'EndDay' -Value 5 -Type DWord
# From
# Possible options:
# 12 AM = 0; 1 AM = 1; 2 AM = 2; 3 AM = 3; 4 AM = 4; 5 AM = 5; 6 AM = 6; 7 AM = 7; 8 AM = 8
# 9 AM = 9; 10 AM = 10; 11 AM = 11; 12 PM = 12; 1 PM = 13; 2 PM = 14; 3 PM = 15; 4 PM = 16
# 5 PM = 17; 6 PM = 18; 7 PM = 19; 8 PM = 20; 9 PM = 21; 10 PM = 22; 11 PM = 23
Set-ItemProperty -Path $k -Name 'StartHour' -Value 20 -Type DWord
# To
# Possible options:
# 12 AM = 0; 1 AM = 1; 2 AM = 2; 3 AM = 3; 4 AM = 4; 5 AM = 5; 6 AM = 6; 7 AM = 7; 8 AM = 8
# 9 AM = 9; 10 AM = 10; 11 AM = 11; 12 PM = 12; 1 PM = 13; 2 PM = 14; 3 PM = 15; 4 PM = 16
# 5 PM = 17; 6 PM = 18; 7 PM = 19; 8 PM = 20; 9 PM = 21; 10 PM = 22; 11 PM = 23
Set-ItemProperty -Path $k -Name 'EndHour' -Value 22 -Type DWord
# High Priority Limit
Set-ItemProperty -Path $k -Name 'HighBandwidthLimit' -Value 0 -Type DWord # maximum 4294967200
# High Priority Unit
# Possible options:
# Kbps = 1
# Mbps = 2
# Unlimited = 3
Set-ItemProperty -Path $k -Name 'HighBandwidthType' -Value 3 -Type DWord
# Normal Priority Limit
Set-ItemProperty -Path $k -Name 'NormalBandwidthLimit' -Value 0 -Type DWord # maximum 4294967200
# Normal Priority Unit
# Possible options:
# Kbps = 1
# Mbps = 2
# Unlimited = 3
Set-ItemProperty -Path $k -Name 'NormalBandwidthType' -Value 3 -Type DWord
# Low Priority Limit
Set-ItemProperty -Path $k -Name 'LowBandwidthLimit' -Value 0 -Type DWord # maximum 4294967200
# Low Priority Unit
# Possible options:
# Kbps = 1
# Mbps = 2
# Unlimited = 3
Set-ItemProperty -Path $k -Name 'LowBandwidthType' -Value 3 -Type DWordDisable
# Disable: Bits/BITS_MaxBandwidthV2_Maintenance
$k = 'HKLM:\Software\Policies\Microsoft\Windows\BITS\Throttling'
if (-not (Test-Path -Path $k)) { New-Item -Path $k -Force | Out-Null }
# The ADMX does not specify the value written; the GPO editor usually writes REG_DWORD 1 (enabled) / 0 (disabled)
Set-ItemProperty -Path $k -Name 'EnableMaintenanceLimits' -Value 0 -Type DWord # assumed value (not defined in the ADMX)Revert to "Not configured"
# Revert to "Not configured": Bits/BITS_MaxBandwidthV2_Maintenance
$k = 'HKLM:\Software\Policies\Microsoft\Windows\BITS\Throttling'
Remove-ItemProperty -Path $k -Name 'EnableMaintenanceLimits' -ErrorAction SilentlyContinue
$k = 'HKLM:\Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule'
Remove-ItemProperty -Path $k -Name 'StartDay' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'EndDay' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'StartHour' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'EndHour' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'HighBandwidthLimit' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'HighBandwidthType' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'NormalBandwidthLimit' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'NormalBandwidthType' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'LowBandwidthLimit' -ErrorAction SilentlyContinue
Remove-ItemProperty -Path $k -Name 'LowBandwidthType' -ErrorAction SilentlyContinueOptions (10)
| Label | Control | Registry value | REG type | Constraints / details | ||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FromDeBITS_MaintenanceDaysFrom | Drop-down listenum | StartDayin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #1
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| ToÀBITS_MaintenanceDaysTo | Drop-down listenum | EndDayin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #5
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| FromDeBITS_MaintenanceHoursFrom | Drop-down listenum | StartHourin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #20
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| ToÀBITS_MaintenanceHoursTo | Drop-down listenum | EndHourin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #22
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| High Priority Limit:Limite de priorité haute :BITS_MaintenanceHighPriorityLimit | Numeric boxdecimal | HighBandwidthLimitin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Max: 4294967200 · Default (UI): 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| High Priority Unit:Unité de priorité haute :BITS_MaintenanceHighPriorityUnit | Drop-down listenum | HighBandwidthTypein Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #2
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Normal Priority Limit:Limite de priorité normale :BITS_MaintenanceNormalPriorityLimit | Numeric boxdecimal | NormalBandwidthLimitin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Max: 4294967200 · Default (UI): 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Normal Priority Unit:Unité de priorité normale :BITS_MaintenanceNormalPriorityUnit | Drop-down listenum | NormalBandwidthTypein Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #2
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Low Priority Limit:Limite de priorité basse :BITS_MaintenanceLowPriorityLimit | Numeric boxdecimal | LowBandwidthLimitin Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Max: 4294967200 · Default (UI): 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Low Priority Unit:Unité de priorité basse :BITS_MaintenanceLowPriorityUnit | Drop-down listenum | LowBandwidthTypein Software\Policies\Microsoft\Windows\BITS\Throttling\MaintenanceSchedule | REG_DWORD | Required · Default choice (UI): #2
|